Wall and centre seal

This vertical centre seal perfectly deflects splash water between the fixed glass element and the door of your all-glass shower with a gap width of up to 12 mm. Thanks to its transparency, it adapts harmoniously to your individually designed bathroom. The seal is available for glass walls with a thickness of 4-8 mm.

The carrier material (U-piece, which is pushed onto the glass) is made of transparent satin rigid PVC and is 12 mm high. The sealing lip, also known as a sealing fin, is made of transparent textured soft PVC. Due to the soft PVC component, the shower seal hugs the glass and offers elasticity and flexibility.

These extremely durable profiles are manufactured from two different PVC thicknesses – a rigid and a soft component – in a transparent-clear finish. Each profile ensures a reliable and tight seal and visually blends perfectly into your bathroom.

We offer this sealing profile in lengths of 200 cm and 250 cm (only 6-8 mm). A technical drawing with the corresponding dimensions is stored for each item in our shop. Attaching the seal to your glass element is very easy and uncomplicated: simply pull off the old seal, clean the glass and push on the newly purchased gap seal. You do not need a professional for this. For cutting, use a PUK saw or mitre shears.

For further support, we are available by telephone or via our contact form.

Care tip: The seal should only be cleaned with chlorine-free, non-alkaline cleaning agents. Avoid using aggressive cleaning agents that contain chlorine, as well as abrasive cleaners or solvents, as these attack the plastic. Lukewarm water combined with soft microfibre cloths is sufficient for this to maintain the transparent design and water repellency in the long term.