Wall and centre seal with long sealing lip

This vertical gap, door and wall seal perfectly deflects splash water between the fixed glass element and revolving door as well as the wall of your all-glass shower. Thanks to its transparency, it adapts ideally to your individually designed bathroom. This seal is exclusively suitable for a glass thickness of 6-8 mm.

The carrier material (U-piece, which is pushed onto the glass) is made of transparent satin rigid PVC and is 12 mm high. The centre seal, also known as a sealing fin, is made of textured soft PVC and reaches a total length of 23 mm together with the carrier. This makes this seal suitable for particularly large gap widths. Due to the soft PVC component, the shower seal hugs the glass and offers elasticity and flexibility.

These extremely durable profiles are manufactured from two different PVC thicknesses – a rigid and a soft component – in a transparent-clear finish. Each profile ensures a reliable and tight seal and visually blends perfectly into your bathroom.

This profile has a length of 200 cm. Attaching the seal to your glass element is very easy: simply pull off the old seal, clean the glass and push on the newly purchased gap seal. You do not need a professional for this. For cutting, you can use a PUK saw or mitre shears.

For further support, we are available by telephone or via our contact form.

Care tip: The seal should only be cleaned with chlorine-free, non-alkaline cleaning agents. Avoid using aggressive cleaning agents that contain chlorine, as well as abrasive cleaners or solvents, as these attack the plastic. Lukewarm water combined with soft microfibre cloths is sufficient for this to maintain the transparent design and water repellency in the long term.